Mobile homes, now called manufactured homes, were usually about 8 feet in width, with later models being much wider - with now up to 18 foot models being available. This is a term used to describe manufactured homes built before the HUD code came into being on June 15, 1976.
These homes were actually only built to industry standards which were voluntary. As such, the quality of such homes differed between manufacturers.
Single section
The single section type is usually one of the most widely used and popular units, as it is very cost effective and is good value. They can range from 15 feet wide by about 70-85 feet long, and can usually offer up to over 1,200 or 1,300 square feet of area to live in.
However, in it must be noted that the longer the model, the more chance that it can bend when it is being moved to the final location. This movement could result in some cases where the inside will have to be fixed when the house is being assembled.
Multi-section
Multi-section units are basically where multiple units are built separately, and transported to the same location where they are connected together to make one larger living space. It is also possible (though often costly) to disconnect the units and move them to a new site in the future. An average multi-section unit can have around 1,500 square feet of living space.
It is important to note, that the transportation of any such units must only be done by qualified professionals. It is also vital that multi sectioned units must be connected properly and levelled correctly so that leaks in the roofs are prevented.
Modular homes
Modular homes are basically a type of multi-sectioned unit, in which the individual modules (which are built 90% finished), are transported to the final site where they are installed on top of a foundation. Modular homes must comply with the building codes of the particular state where they were manufactured, and as such are not allowed to be moved out of the state where it was built.
Panelized homes
Panelized homes are similar to modular homes, however they require much more effort in assembly. Panels - which are entire walls complete with doors, windows, wiring etc, are built in the factory, and then sent to the site via ground transport to be put together.
Panelised homes, like modular homes, must meet the code of the state where it was built, and the local building codes where the home is finally located.
Pre-Cut Homes
Pre-Cut homes are also built in factories, shipped to the final building site, and put together. Materials for pre-cut homes are made to specific design specifications before being transported.
Pre-Cut homes are built to meet local or state building requirement codes, and can include dome, log, and kit homes.
It is important to note, the local laws, conditions, and regulations play an enormous part in the type and sizes of manufactured homes which are available to be built in your desired area.
It is also vital that anyone wishing to purchase a manufactured home must know and understand the local regulations and the processes required for transporting the home. In fact, 50 states now allow for 14-foot wide homes to be transported via highways.
In the end, it is best to talk to a qualified and reputable retailer before you make your purchase so that all of these factors can be considered and an informed decision made.
Mobile homes, now called manufactured homes, were usually about 8 feet in width, with later models being much wider - with now up to 18 foot models being available. This is a term used to describe manufactured homes built before the HUD code came into being on June 15, 1976.
The single section type is usually one of the most widely used and popular units, as it is very cost effective and is good value. They can range from 15 feet wide by about 70-85 feet long, and can usually offer up to over 1,200 or 1,300 square feet of area to live in.
Multi-section units are basically where multiple units are built separately, and transported to the same location where they are connected together to make one larger living space. It is also possible (though often costly) to disconnect the units and move them to a new site in the future. An average multi-section unit can have around 1,500 square feet of living space.
Modular homes are basically a type of multi-sectioned unit, in which the individual modules (which are built 90% finished), are transported to the final site where they are installed on top of a foundation. Modular homes must comply with the building codes of the particular state where they were manufactured, and as such are not allowed to be moved out of the state where it was built.
Panelized homes are similar to modular homes, however they require much more effort in assembly. Panels - which are entire walls complete with doors, windows, wiring etc, are built in the factory, and then sent to the site via ground transport to be put together.
